|
 |
|
| MHD-A3W-8/17/24/35(Three-stage Net Roller
approved by the Fisheries Agency) |
| <Application> Bastard halibut, Japanese whiting, spiny
lobster, yellowtail, Alaska pollack,
top
shell |
|
|
 |
Specification
| Net drawing power |
500kg |
| Net drawing speed |
40m/min |
| Hydraulic motor |
S-240 |
| Weight |
abt 260kg |
*Type 17 is standard. Also available 8/24/35 type |
|
| Effective, speedy and less labor net draw
operation due to three drums
winding. Almost maintenance-free because of being
made by stainless steel with
the inside in
oil bath way. Square type rubbers formed from master piece
are easy to change. |
|
| MH-100 (Gill net with off-center roller approved
by the Fisheries Agency) |
| <Application> Floating gill net, bottom gill net, Japanese
Danish seine, stick-held dip
net, surrounding
seine |
|
|
 |
Specification
| Net haul load |
500kg |
| Net hauling speed |
0-20m/min |
| Revolution of net |
0-35 r.p.m. |
| Hydraulic motor |
S-280 |
| Weight |
abt 100kg |
|
|
| Strongly- built, durable and sea water-resistant
by stainless steel with roller
by special
type of rubber. Clipping system realized to pull net automatically
by putting net or rope between
rollers. Draw net speed is easily adjustable by change
valve handle. |
|
| MH-85 (Gill net with off-center roller approved
by the Fisheries Agency) |
|
|
▲ＭＨ－８５Ｈ |
Specification
| Net haul load |
100kg |
| Net haul speed |
0-20m/min |
| Revolution of net |
0-35 r.p.m. |
| Hydraulic motor |
S-70 |
| Weight |
abt 70kg |
Specification(electric)
| Net haul load |
70kg |
| Net haul speed |
15-30m/min |
| Revolution of net |
25-50 r.p.m. |
| Motor |
DC24V400W(with brake) |
| Weight |
abt 85kg |
|
ＭＨ-８５Ｅ
|
|
| Made lighter and smaller than MH-100. Easy installment. Electric is also available in addition to
hydraulic and the foot switch
of electric
machine releases both hands free
of an operator. |
|
| MH-A2-1/2/3/4 (Line hauler for long line) |
| <Application> Lines for puffer, sea bream, sawedged perch,
tilefish. |
|
|
▲ＭＨ－Ａ２-１ |
Specification(MH-A2-3:roller 300D)
| Net haul power |
150kg |
| Winding speed |
0-90m/min |
| Hydraulic motor |
H-290 |
| Weight |
abt 45kg |
*-1:215D, -2:270D, -3:300D, -4:380D |
ＭＨ-Ａ２-４ |
|
| Strongly-built by stainless steel and sea
water resistant. Excellent in less labor and safe operation
as change valve handle can freely
control
the winding speed and choose
right-reverse
revolution. Reverse revolution can be prevented by stopping
the roller, putting the change
valve handle
into neutral. Main rollers are available in various sizes
ranging from 215D to 380D. |
|